When it comes time to secure a wide load permit in Texas, there is no shortage of concerns and questions that will arise. That’s why it pays to have access to the experts at Osage Specialized Transport. We can tell you everything you need to know about Texas oversize permits so that you can avoid the typical concerns.
Knowing what to expect when you secure a wide load permit in Texas is crucial. To learn more about Texas DOT permits and Texas oversize load regulations, be sure to read on. With our help, obtaining a Texas overweight permit has never been easier.
Each state has specific regulations on these matters, and Texas is no different. The top logistics companies are a useful ally in these instances, as they will always know the proper procedure. Those who do not follow the rules and regulations risk serious injuries and various fines. To successfully transport an oversized load, you must know about the Texas transport regulations.
When is a Texas Heavy Haul Transport Permit Needed?
If the load being transported exceeds the maximum specifications put into place by the state of Texas, the proper permits are required. These permits ensure that the driver in question is following the proper routes during heavy haul trucking. For example, a driver that ignores these routes could place themselves in a very dangerous predicament when they encounter a bridge that is too low for them to safely make their way under.
The non-approved routes may also have dangerous hazards to the driver and the equipment they are using. The other motorists who are on the roadways also have to be considered. A wide load not being transported through the proper routes could also place them in danger. That’s why drivers must be aware of the maximum load limits that are permitted within the state of Texas. Anything over these amounts will require the proper permits:
Overhang: The regulations dictate that you cannot exceed 2’ (two feet) at the front and 4’ (four feet) at the rear without a permit.
Height: 14′ (fourteen feet) of height before permit required.
Width: 8’6′” (Eight feet, six inches) not to exceed without a permit
Texas Routine Oversize Load Permits
These permits also come with exact specifications that must be met before the driver can legally embark on the transport process with an oversize load.
Weight: A single axle is capped at 25,000 pounds. A tandem axle limit is 46,000 pounds. As for the tridem, the limit is set at 60,000, whereas a quad is capped at 70,000 per the axle group.
Overhang: 30′ (Thirty feet)
Width: This will depend on where/how the load is transported. 20′ (twenty feet) is the usual limit, but this shrinks to 16′ (sixteen feet) if the load is sent down the interstate.
Length: 125′ (125 feet) is the absolute maximum.
If the load exceeds any of these permit regulations, it is then classified as a super load.
When Will Escort Vehicles Be Required for Texas Transport?
Also known as pilot cars, escort vehicles can be a key aspect of Texas transport. These vehicles operate in the interest of public safety, ensuring that oversize and heavy loads can be guided properly. Signs and flags are used to adorn them, making it easier for motorists to see them during their travels and remain safe.
The driver of an escort vehicle remains in contact with the truck driver at all times. This keeps all parties involved as safe as possible. When oversize loads are transported in Texas, escort vehicles may be needed. Let’s take a closer look at the crucial details:
When Is One Escort Vehicle Needed?
If the load is over 17′ (seventeen feet) high, has a 20′ (twenty foot) overhang, is over 14′ (fourteen feet) in width, or is over 110′ long (110 feet), this means that one escort vehicle will be needed to ensure maximum safety.
When Are Two Escort Vehicles Needed?
If the load is over 18′ (eighteen feet) high, has a 30′ (thirty foot) overhang, is over 16′ (sixteen feet) in width, or is over 125′ long (125 feet), this means that two escort vehicles will be required to maintain a maximum level of safety.
The Importance of Texas Transport Regulations for Heavy Equipment
By learning everything you need to know about these regulations, you can avoid all sorts of catastrophic scenarios. These regulations have been put into place to keep the driver safe, as well as all of the motorists with whom they will be sharing the roadways.
Working with a reputable long-haul company is also crucial in these instances. Handling all of the permits and paperwork can be challenging, not to mention time-consuming. That’s why you need the assistance of an experienced long-haul company that can take care of all these aspects on your behalf before the journey begins.
Safety standards and route planning must also be prepared ahead of time. If you are shipping in Texas, take the time to speak with logistics agents that have the necessary experience. They will be happy to provide you with the best equipment shipping services at an easily affordable price.
Once you are ready to start, the good folks at Osage Specialized Transport are prepared to help. We have relevant experience and can guide our clientele through each and every step of the process. Oversize loads are no hassle when you contact us. We will walk you through everything you need to know and get your load transported on time so you can remain on schedule!